NLV74HC574ADWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Propagation Delay | 27 ns |
| Quiescent Current | 4μA |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC574ADWR2G Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. You can find it in the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 2V~6V. In the operating environment, the temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. It belongs to the Automotive, AEC-Q100, 74HCseries of FPGAs. A frequency of 35MHzshould be the maximum output frequency. D latch consists of 1 elements. There are 20 terminations,A voltage of 5V is used to power it. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of HC/UH. There is an electronic part mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device's clock edge trigger type is Positive Edge. Vsup reaches its maximum value at 6V. Normally, the supply voltage (Vsup) should be kept above 2V. This D flip flop is equipped with 0 ports. In terms of quiescent current, it consumes 4μA .
NLV74HC574ADWR2G Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
20 pins
NLV74HC574ADWR2G Applications
There are a lot of ON Semiconductor NLV74HC574ADWR2G Flip Flops applications.
- Set-reset capability
- Memory
- Parallel data storage
- Individual Asynchronous Resets
- Cold spare funcion
- Functionally equivalent to the MC10/100EL29
- Clock pulse
- Frequency Dividers
- High Performance Logic for test systems
- Single Up Count-Control Line
