NLV74HC74ADG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Propagation Delay | 17 ns |
| Quiescent Current | 2μA |
| Family | HC/UH |
| Logic Function | AND, D-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 17ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLV74HC74ADG Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. The package Tubecontains it. Currently, the output is configured to use Differential. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. In this case, the operating temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the Automotive, AEC-Q100, 74HC series. A frequency of 35MHzshould not be exceeded by its output. In total, it contains 2 elements. A total of 14terminations have been recorded. It is powered by a voltage of 5V . This JK flip flop has a 10pFfarad input capacitance. This D flip flop belongs to the family of HC/UH. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. In this case, the maximum supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be kept above 2V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. As a result, it consumes 2μA of quiescent current without being affected by external factors.
NLV74HC74ADG Features
Tube package
Automotive, AEC-Q100, 74HC series
14 pins
NLV74HC74ADG Applications
There are a lot of ON Semiconductor NLV74HC74ADG Flip Flops applications.
- Clock pulse
- Data Synchronizers
- Storage Registers
- Circuit Design
- Asynchronous counter
- Shift registers
- Data transfer
- Reduced system switching noise
- Dynamic threshold performance
- Functionally equivalent to the MC10/100EL29
