NUD3112DMT1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74, SOT-457 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NUD3112 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 300mA |
| Interface | On/Off |
| Element Configuration | Dual |
| Output Configuration | Low Side |
| Power Dissipation | 380mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Rise Time | 61ns |
| Drain to Source Voltage (Vdss) | 14V |
| Fall Time (Typ) | 61 ns |
| Continuous Drain Current (ID) | 500mA |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 6V |
| Voltage - Load | 14V Max |
| Driver Number of Bits | 1 |
| Drain to Source Breakdown Voltage | 14V |
| Rds On (Typ) | 900m Ω (Max) |
| Drain to Source Resistance | 900mOhm |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NUD3112DMT1 Overview
The LED driver's packaged as a Tape & Reel (TR).The SC-74, SOT-457 package contains it.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 2 for output.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.It comes under the family of NUD3112.In total, there are 6 terminations.It is important to note that the LED driving board has 2 functions.The maximum output current must drop to 300mA to meet the operation criteria.A supply voltage of 12V leads to high efficiency.It is equipped with a total of 6 pins.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.
NUD3112DMT1 Features
Supplied from 12V
NUD3112DMT1 Applications
There are a lot of ON Semiconductor NUD3112DMT1 Power Switches ICs applications.
- Hot Swaps
- Hot Swap
- Storage (HDDs, SSDs)
- Notebook PC
- Notebook and Tablet Computers
- Wireless Headsets
- Handheld Devices
- Hard Disk Drives
- Portable Video Game Players
- Wearable Devices
