OP249GSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP249 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 7mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 22V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 36mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 750μV |
| Gain Bandwidth Product | 4.7MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4700 kHz |
| Voltage Gain | 120.83dB |
| Average Bias Current-Max (IIB) | 0.0045μA |
| Power Supply Rejection Ratio (PSRR) | 98dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Settling Time | 900 ns |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000075μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP249GSZ-REEL Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a J-FET-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. Op amp rates 750μV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 7mA. Keeping the voltage gain at 120.83dB is the best course of action. The op amp ic has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 15V. TAPE AND REEL is adopted to pack the instrumentation amplifier. 3.5mA quiescent currents are flowing through buffer op amp.
OP249GSZ-REEL Features
8 Pins
supply voltage of 15V
120.83dB voltage gain
OP249GSZ-REEL Applications
There are a lot of Analog Devices Inc. OP249GSZ-REEL Instrumentational OP Amps applications.
- Portable media players
- Multiplication circuits
- Video data acquisition
- Industrial control system
- Non-polarized electrodes
- Medical imaging
- High-frequency data acquisition systems
- Addition operation circuits
- Broadcasting
- Oscilloscopes
