OP297FPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OP297 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 1.25mA |
| Nominal Supply Current | 1mA |
| Quiescent Current | 625μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 35pA |
| Voltage - Supply, Single/Dual (±) | 4V~40V ±2V~20V |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 500 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 130.1dB |
| Average Bias Current-Max (IIB) | 0.00075μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 3pF |
| Input Voltage Noise Density | 20nV/sqrt Hz |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP297FPZ Overview
There is a 8-DIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. A Tube case is used for delivering the op amp. We are approaching the 8h termination of the year. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are available on the instrumentation amplifier. Op amp ic rates 50μV for input offset voltage. For this electrical component, Through Hole is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 1.25mA and 10 . It is recommended to keep the voltage gain at 130.1dB at all times. Buffer op amp is equipped with 2 channels on the device. The operating supply voltage of the buffer op amp is rated at 15V. There is an 625μA quiescent current in linear amplifier.
OP297FPZ Features
8 Pins
supply voltage of 15V
130.1dB voltage gain
OP297FPZ Applications
There are a lot of Analog Devices Inc. OP297FPZ Instrumentational OP Amps applications.
- earphone
- Thermocouples
- Biopotential
- pH (acidity)
- single/dual op amp sum and difference circuits
- Video data acquisition
- Radiation thermometry transducers
- Proportional operation circuits
- Signal transformation
- Digital cameras
