OP37EZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OP37 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Channels | 1 |
| Operating Supply Current | 5.67mA |
| Quiescent Current | 5.67mA |
| Slew Rate | 17V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Input Offset Voltage (Vos) | 30μV |
| Bandwidth | 63MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 63000 kHz |
| Voltage Gain | 125.11dB |
| Average Bias Current-Max (IIB) | 0.06μA |
| Power Supply Rejection Ratio (PSRR) | 114dB |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=5 |
| Voltage - Input Offset | 10μV |
| Bias Current-Max (IIB) @25C | 0.04μA |
| Input Voltage Noise Density | 3.5nV/sqrt Hz |
| Height | 3.56mm |
| Length | 10.29mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
OP37EZ Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. This is a General Purpose type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 30μV voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 5.67mA and 10 . Maintain 125.11dB as the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of instrumentation amplifier is rated 22V voltage. As a result, linear amplifier's quiescent current is 5.67mA.
OP37EZ Features
8 Pins
supply voltage of 15V
125.11dB voltage gain
OP37EZ Applications
There are a lot of Analog Devices Inc. OP37EZ Instrumentational OP Amps applications.
- PDA
- Weak signal detection
- Hand-held batteries
- Power generator
- Differentiator circuits
- Gaming industry
- RF cable systems
- Semiconductor detectors
- Addition operation circuits
- Laptop
