OP4177ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP4177 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2mA |
| Quiescent Current | 500μA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 125 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 1.3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 15μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Input Voltage Noise Density | 7.9nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP4177ARZ-REEL Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 14 terminations. In total, there are 14 pins on this op amp ic. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 75μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 2mA . There should be no change in the voltage gain at 126.02dB. There are 4 channels on the operational amplifiers. It is used TAPE AND REEL to pack the op amps. 500μA quiescent currents are flowing through buffer op amp.
OP4177ARZ-REEL Features
14 Pins
supply voltage of 5V
126.02dB voltage gain
OP4177ARZ-REEL Applications
There are a lot of Analog Devices Inc. OP4177ARZ-REEL Instrumentational OP Amps applications.
- Measurements of Wheatstone bridge
- Portable electronic products powered by batteries
- Automotive sensors
- Hand-held batteries
- Computer workstations
- Tablets
- Signal transformation
- Integrator circuits
- Automation control systems
- Power control
