OP913WSL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-5 Variant, 2 Leads, Lens Top Metal Can |
| Number of Pins | 2 |
| Operating Temperature | -65°C~125°C |
| Packaging | Bulk |
| Published | 1997 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -65°C |
| Voltage - Rated DC | 5V |
| Diode Type | PIN |
| Power Dissipation | 150mW |
| Viewing Angle | 60° |
| Voltage - DC Reverse (Vr) (Max) | 32V |
| Rise Time | 50ns |
| Fall Time (Typ) | 50 ns |
| Max Reverse Voltage (DC) | 32V |
| Reverse Breakdown Voltage | 32V |
| Reverse Voltage | 60V |
| Wavelength | 900nm |
| Dark Current | 25nA |
| Active Area | 8.53mm2 |
| Current - Dark (Typ) | 25nA |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
OP913WSL Overview
To protect these photodiodes from damage, the Bulk is used. For safety reasons, the photodiodes are packaged in TO-5 Variant, 2 Leads, Lens Top Metal Can packages. Continually operating in reverse-bias mode, a photodiode's maximum voltage is 32V. When the photodiodes are reverse-biased, the voltage should never exceed 32V. There are 2 pins on the photodiodes. During a circuit, the photodiodes could release 150mW heat. While photodiodes are operating, the temperature should not exceed 125°C. But the minimum operating temperature for the photodiodes should be set to -65°C. ?It should be 32V for the reverse anode voltage of the photodiodes. As long as the photodiodes were reverse-biased, they could supply the voltage 60V. A photodiode conducts 25nA current without light input.
OP913WSL Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -65°C~125°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Viewing Angle: 60°
OP913WSL Applications
There are a lot of TT Electronics/Optek Technology OP913WSL Photodiodes applications.
- Heart Rate Monitoring
- Sterilization Lamp Monitoring
- YAG laser detection
- High speed photo detector
- Pure UV-C Monitoring
- Photo interrupters
- Light Bariers
- Optical Switches
- Optical Analytics
- Health Monitoring
