OPA137N/3K
| Parameters | |
|---|---|
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA137 |
| Pin Count | 5 |
| Operating Supply Voltage | 18V |
| Number of Circuits | 1 |
| Operating Supply Current | 220μA |
| Nominal Supply Current | 270μA |
| Output Current | 60mA |
| Slew Rate | 3.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 3mV |
| Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
OPA137N/3K Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 5. Linear amplifier has a total of 5 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 5 pins. As far as the input offset voltage is concerned, linear amplifier rates at 1.5mV. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 220μA . It is recommended to keep the voltage gain at 94dB at all times. During the manufacturing process, this buffer amplifier is divided into 1 circuits. The operating supply voltage of the buffer op amp is rated at 18V. The instrumentation amplifier is packed in the form of TR. MicroAmplifier? corresponds to linear amplifier's series.
OPA137N/3K Features
5 Pins
supply voltage of 15V
94dB voltage gain
OPA137N/3K Applications
There are a lot of Texas Instruments OPA137N/3K Instrumentational OP Amps applications.
- Band-pass filter
- Semiconductor detectors
- Biopotential
- Image computer boards
- Industrial applications including automation
- Thermocouples
- Logarithmic operation circuits
- Gaming industry
- Medical imaging
- Car stereo
