OPA1604AIPWR
| Parameters | |
|---|---|
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OPA1604 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 2.8mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 35000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 126.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 35MHz |
| Max I/O Voltage | 1mV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Digi-Reel® |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
OPA1604AIPWR Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. Buffer amps of this type are called Audio-types. The op amp is delivered to you in a Digi-Reel? case. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are located on this board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 14 pins. Regarding input offset voltage, op amp rates 1mV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using an 2.6mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 120dB at all times. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. For the operating supply voltage of the op amp ic, there is a rating of 4. For packing the buffer amplifier, the TR-axis is adopted. This buffer amplifier is assigned within the SoundPlus? series by its manufacturer.
OPA1604AIPWR Features
14 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
OPA1604AIPWR Applications
There are a lot of Texas Instruments OPA1604AIPWR Instrumentational OP Amps applications.
- Gaming industry
- Subtraction operation circuits
- Displayers for aircraft and air transportation control systems
- single/dual op amp sum and difference circuits
- Addition operation circuits
- Power generator
- Radiation thermometry transducers
- Blood pressure sensors
- Differentiator circuits
- Test and measurement instruments
