OPA2188AIDGKR

2 Channels 18mA per Channel 160pA 120 dB Instrumentational OP Amps 0.004μA 18V 4V~36V ±2V~18V OPA2188 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA2188AIDGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 993
Description: 2 Channels 18mA per Channel 160pA 120 dB Instrumentational OP Amps 0.004μA 18V 4V~36V ±2V~18V OPA2188 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~105°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Terminal Pitch	0.65mm
Base Part Number	OPA2188
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	18V
Number of Channels	2
Operating Supply Current	415μA
Nominal Supply Current	475μA
Output Current	18mA
Slew Rate	0.8V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	120 dB
Current - Input Bias	160pA
Voltage - Supply, Single/Dual (±)	4V~36V ±2V~18V
Output Current per Channel	18mA
Input Offset Voltage (Vos)	6μV
Bandwidth	2MHz
Unity Gain BW-Nom	2000 kHz
Voltage Gain	136dB
Average Bias Current-Max (IIB)	0.004μA
Power Supply Rejection Ratio (PSRR)	142.5dB
Low-Offset	YES
Frequency Compensation	YES
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Nominal Gain Bandwidth Product	2MHz
Max I/O Voltage	25μV
Input Offset Current-Max (IIO)	0.006μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA2188AIDGKR Overview

Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Op amps are Zero-Drift types of amplifier on the chip. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins on it. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 6μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~105°C. A supply current of 415μA can be used to operate this linear amplifier. Keeping the voltage gain at 136dB is the best course of action. Instrumentation amplifier has 2 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The instrumentation amplifier is packed in the form of TR.