OPA2241PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | OPA2241 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 2 |
| Operating Supply Current | 30μA |
| Nominal Supply Current | 60μA |
| Slew Rate | 0.01V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 35 kHz |
| Unity Gain BW-Nom | 35 kHz |
| Voltage Gain | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 36V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 35 kHz |
| Max I/O Voltage | 250μV |
| Power | NO |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA2241PA Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. This is a General Purpose type op amp. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. Op amp rates 250μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using an 30μA supply current, this operational amplifier ics can be operated. 120dB should remain the voltage gain. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 18V.
OPA2241PA Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
OPA2241PA Applications
There are a lot of Texas Instruments OPA2241PA Instrumentational OP Amps applications.
- Industrial applications including automation
- Communication
- Non-polarized electrodes
- Voltage regulation circuit
- Automotive sensors
- Mobile phone
- Communication device
- Measurements of Wheatstone bridge
- Semiconductor detectors
- Portable electronic products powered by batteries
