OPA2374AIDCNTG4
| Parameters | |
|---|---|
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA2374 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 585μA |
| Nominal Supply Current | 1.5mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 2.3V~5.5V ±1.15V~2.75V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 6.5MHz |
| Unity Gain BW-Nom | 6500 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 92.04dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 6.5MHz |
| Max I/O Voltage | 5mV |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.63mm |
| Thickness | 1.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
OPA2374AIDCNTG4 Overview
There is a SOT-23-8 case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. It is possible to operate this buffer amplifier from a supply current of 585μA . There should be no change in the voltage gain. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The op amp is rated for an operating supply voltage of 2. The instrumentation amplifier is packed in the form of TR.
OPA2374AIDCNTG4 Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
OPA2374AIDCNTG4 Applications
There are a lot of Texas Instruments OPA2374AIDCNTG4 Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Video data acquisition
- Comparator
- Power transmission
- Broadcasting
- Signal operation
- Car stereo
- Radiation thermometry transducers
- Automatic control
- PDA
