Parameters |
Common Mode Rejection Ratio |
106 dB |
Current - Input Bias |
70pA |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±0.9V~2.75V |
Output Current per Channel |
5mA |
Input Offset Voltage (Vos) |
10μV |
Bandwidth |
350 kHz |
Unity Gain BW-Nom |
350 kHz |
Voltage Gain |
130dB |
Average Bias Current-Max (IIB) |
0.0002μA |
Power Supply Rejection Ratio (PSRR) |
120dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
7V |
Voltage - Input Offset |
2μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.0002μA |
Programmable Power |
NO |
Max I/O Voltage |
10μV |
Input Offset Current-Max (IIO) |
0.0004μA |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
OPA333 |
Pin Count |
5 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
2.75V |
Number of Channels |
1 |
Operating Supply Current |
17μA |
Nominal Supply Current |
25μA |
Output Current |
5mA |
Slew Rate |
0.16V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Zero-Drift |
OPA333AIDBVR Overview
There is a SC-74A, SOT-753 case in which the instrumentation amplifier is packaged. A Zero-Drift-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. The total number of pins on linear amplifier is 5. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 5 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 10μV. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. A supply current of 17μA can be used to operate this linear amplifier. Maintain 130dB as the voltage gain. 1 channels are available on the instrumentation amplifier. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 2.75V. It is used TR to pack the op amps.
OPA333AIDBVR Features
5 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
OPA333AIDBVR Applications
There are a lot of Texas Instruments OPA333AIDBVR Instrumentational OP Amps applications.
- High gain DC amplifier
- Portable media players
- MP3
- Cinema or auditorium audio system
- Scintillation detectors
- Switching amplifier
- Strain gauges
- Broadcasting
- Vehicle electronics
- Hand-held batteries