OPA340MDBVTEP
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA340 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 750μA |
| Nominal Supply Current | 950μA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 5.5MHz |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 124dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0006μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA340MDBVTEP Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 5. The total number of pins on linear amplifier is 5. This linear amplifier should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. 5 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 500μV voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~125°C . This op amp can operate from a supply current at 750μA. 124dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted. Instrumentation amplifiers are numbered by their MicroAmplifier? series.
OPA340MDBVTEP Features
5 Pins
supply voltage of 5V
124dB voltage gain
Output Type: Rail-to-Rail
OPA340MDBVTEP Applications
There are a lot of Texas Instruments OPA340MDBVTEP Instrumentational OP Amps applications.
- Active probe
- Weighing systems
- Broadcasting
- Weak signal detection
- Multiplication circuits
- Image computer boards
- Commercial audio systems
- Information processing
- Instrumentation
- High/low-pass filter circuit
