OPA378AIDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | microPOWER™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | OPA378 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 125μA |
| Nominal Supply Current | 10mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 150pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V ±1.1V~2.75V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 900 kHz |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 134dB |
| Power Supply Rejection Ratio (PSRR) | 116.48dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 7V |
| Voltage - Input Offset | 20μV |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 1kHz |
| Programmable Power | NO |
| Max I/O Voltage | 50μV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA378AIDBVT Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. Op amps are Zero-Drift types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. In total, there are 5 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 5 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 50μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. An 125μA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 134dB is the best course of action. Buffer op amp is equipped with 1 channels on the device. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. As a result of this, the buffer amplifier is packed in TR. Buffer op amp series numbers are indicated by the microPOWER?.
OPA378AIDBVT Features
5 Pins
supply voltage of 5V
134dB voltage gain
Output Type: Rail-to-Rail
OPA378AIDBVT Applications
There are a lot of Texas Instruments OPA378AIDBVT Instrumentational OP Amps applications.
- Integrator circuits
- Test and measurement instruments
- Medical instruments
- Signal filtering
- Blood pressure sensors
- Automotive sensors
- Semiconductor detectors
- Video conversion and routing
- Proportional counter tubes
- Differentiator circuits
