OPA835IRUNT
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFQFN |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | OPA835 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 250μA |
| Supply Current-Max | 0.35mA |
| Slew Rate | 260V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 91 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 31MHz |
| Unity Gain BW-Nom | 30000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 100μV |
| Settling Time | 55 ns |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 56MHz |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Wideband | NO |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
OPA835IRUNT Overview
There is a 10-WFQFN case in which the instrumentation amplifier is packaged. This is a Voltage Feedback type op amp. A Tape & Reel (TR) case is used for delivering the op amp. It is estimated that there will be at least 10 terminations this year. A total of 10 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 10 pins that make up the linear amplifier. There is an input offset voltage of 500μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Operational amplifier can operate supply current at 250μA. There should be no change in the voltage gain at 120dB. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. For the operating supply voltage of the op amp ic, there is a rating of 1. It is used TR to pack the op amps.
OPA835IRUNT Features
10 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
OPA835IRUNT Applications
There are a lot of Texas Instruments OPA835IRUNT Instrumentational OP Amps applications.
- Strain gauges
- Power control
- Fission chambers
- Power generator
- Weighing systems
- Ultrasound transducers
- High-frequency data acquisition systems
- Medical instruments
- E-book readers
- Industrial applications including automation
