P4080NSE7MMC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 1295-BBGA, FCBGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~105°C TA |
| Packaging | Tray |
| Published | 2002 |
| Series | QorIQ P4 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | P4080 |
| JESD-30 Code | S-PBGA-B1295 |
| Supply Voltage-Max (Vsup) | 1.05V |
| Supply Voltage-Min (Vsup) | 0.95V |
| Speed | 1.5GHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | PowerPC e500mc |
| Clock Frequency | 133.3MHz |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Ethernet | 1Gbps (8), 10Gbps (2) |
| Number of Cores/Bus Width | 8 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, DDR3 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | DUART, I2C, MMC/SD, RapidIO, SPI |
| Co-Processors/DSP | Security; SEC 4.0 |
| Security Features | Boot Security, Cryptography, Random Number Generator, Secure Fusebox |
| Height Seated (Max) | 3.53mm |
| Length | 37.5mm |
| RoHS Status | ROHS3 Compliant |
P4080NSE7MMC Overview
Due to its 1295-BBGA, FCBGA packaging, it is convenient to ship overseas. High reliability is provided by the advanced packaging method Tray. This CPU has 8 Core 32-Bit cores and 8 Core 32-Bit bus widths. Understand the operating temperature around 0°C~105°C TA. It comes from the QorIQ P4 series. PowerPC e500mc processors are embedded in this CPU. A CPU with this architecture uses DDR2, DDR3 RAM controllers. This microprocessor features DUART, I2C, MMC/SD, RapidIO, SPI interfaces to better serve its users. The CPU runs I/O at 1.8V 2.5V 3.3V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. If you are looking for variants of the cpu microprocessor, try search with P4080. A 1V voltage supply should be used to turn on and run the cpu microprocessor. The supply voltage should not exceed 1.05V. There is a wide width of 16 on the external data bus of this CPU. In this CPU microprocessor, the clock frequency is 0 Hz.
P4080NSE7MMC Features
PowerPC e500mc Core
P4080NSE7MMC Applications
There are a lot of NXP USA Inc. P4080NSE7MMC Microprocessor applications.
- Robots
- Process control devices
- Ipod
- Industrial robot
- Home video and audio
- Glucose monitoring systems (for Type 1 Diabetes)
- Accu-check
- Smoke alarms
- Light sensing & controlling devices
- Toasters
