PAC1710-1-AIA-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PAC1710 |
| Function | Current Monitor |
| Output Type | Digital |
| Power Supplies | 3.3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Voltage - Input | 0V~40V |
| Nominal Supply Current | 360μA |
| Max Supply Current | 900μA |
| Adjustable Threshold | YES |
| Quiescent Current | 360μA |
| Accuracy | ±1% |
| Common Mode Rejection Ratio | 80 dB |
| Sensing Method | High-Side |
| Height | 850μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PAC1710-1-AIA-TR Overview
Included in package Tape & Reel (TR) is this file.In this case, voltage regulator has been packaged in the same way as 10-VFDFN Exposed Pad.Current regulator is mounted by Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~85°C.The input voltage of 0V~40V is supported as an input voltage.10 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.There are two types of PAC1710s in this family.10-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.It is mounted by Surface Mount on this current regulator.It should work as long as it is powered by a 3.3VV power source. If it does not, it will not work.In this power converter, POWER SUPPLY SUPPORT CIRCUIT is an analog IC.Channels are becoming stronger/weaker based on the following statistics: 1.The maximum voltage of 5.5V that can be supplied to the buck boost converter is supported.Power Management Circuits, which is a part that contains all of these current regulations, is included in this part.It operates with the minimal supply voltage of 3V.3.3/5V power supplies provide power to the boost converter.In terms of current regulator's design flexibility, 900μA features a maximum supply current.A quiescent current of 360μA consumes regardless of external influences.
PAC1710-1-AIA-TR Features
Tape & Reel (TR) package
PAC1710 family
The maximal supply voltage of 5.5V
3.3/5V power supplies
PAC1710-1-AIA-TR Applications
There are a lot of Microchip Technology PAC1710-1-AIA-TR Current Regulation/Managements applications.
- Battery chargers
- Automotive current measurement
- Diesel injection controls
- Over-current measurement
- Suspension controls
- Battery management
- DC motor control
- Power supply current measurement
- Vehicle dynamic controls
- Industrial applications current measurement
