PCM2900CDBR
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2900 |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Nominal Supply Current | 67mA |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 3.1V~3.5V |
| Voltage - Supply, Digital | 3.1V~3.5V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Number of Analog Outputs | 2 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
PCM2900CDBR Overview
For space-saving reasons, it is supplied in a 28-SSOP (0.209, 5.30mm Width) package. As a packaging method, Tape & Reel (TR) is adopted. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of Stereo Audio. This device employs the mounting type Surface Mount. It is able to operate normally when the operating performance is set at -25°C~85°C. It consists of 2 / 2 ADCs/ DACs. Supply voltage 3.1V~3.5V is provided to the analog circuit. Digital circuits are powered by 3.1V~3.5V supply voltages. Signals are prevented from reflecting off the transmission line's terminations by using 28 terminations. In electronic terms, it is a kind of 28-pin device. The board is configured with 28 pins. By using its base part number PCM2900, you can find more related parts. On a PCB based on Surface Mount technology, it is mounted. Supply voltage should never exceed 5.25V. Converting analog signals to digital signals requires 1 A/D converters. This electronic part is classified into the subcategory of Other Consumer ICs. Power supplies of 5V are used to operate it. Powered by a 5V supply voltage, it can run. It is expected that 67mA will flow normally through the circuit throughout its lifetime. A total of 2 analog outputs are included.
PCM2900CDBR Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs
PCM2900CDBR Applications
There are a lot of Texas Instruments PCM2900CDBR CODECs Interface ICs applications.
- Addition
- Printing
- Dimensionality reduction
- Pulp & paper mills
- Feature extraction
- Stagecraft
- Wire number reduction in a particular circuits
- Automatic health monitoring systems
- Timber products
- Sawmills
