PCM2906DB
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 285.791543mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | Stereo Audio |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM2906 |
| Pin Count | 28 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Interface | Serial, USB |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 3.25V |
| Nominal Supply Current | 67mA |
| Number of Bits | 16 |
| Data Interface | USB |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 4.35V~5.25V |
| Voltage - Supply, Digital | 4.35V~5.25V |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 96 |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM2906DB Overview
Space-saving reasons have led to it being packaged in a 28-SSOP (0.209, 5.30mm Width) package. It is adopted to package in the Tube way. This electronic part is categorized as a type of Stereo Audio, making it capable of providing high-efficiency performance in a variety of applications. It employs Surface Mount as its mounting type. Operating performance at -25°C~85°C makes it possible to operate normally. The unit is integrated with 2 / 2 ADCs / DACs. A supply voltage of 4.35V~5.25V is applied to the analog circuit. There is a supply voltage of 4.35V~5.25V provided to the digital circuit. Signals are prevented from reflecting off the end of transmission lines by 28 terminations. There are 28 pins on this device. The board is configured with 28 pins. The base part number PCM2906 can be used to find related parts. Using the Surface Mount technology, it is mounted to a PCB. It is recommended to maintain the maximum supply voltage at 5.25V. It is possible to convert analog signals into digital signals using 1 A/D converters. Electronic parts classified as Other Consumer ICs are located in this subcategory. The minimum value of supply voltage should be maintained at 3.25V. Power supplies of 5V are used. Transmission of data is through 2 channels. The storage of information is provided by 16 bits. Normally, a circuit will flow a current of 67mA over its entire length.
PCM2906DB Features
Embedded in the 28-SSOP (0.209, 5.30mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
PCM2906DB Applications
There are a lot of Texas Instruments PCM2906DB CODECs Interface ICs applications.
- Printing
- Electronic circuits
- Servo motors
- Magnetic positional control
- Dynamic applications
- Material handling
- Microprocessor
- Addition
- Position measurement
- Analog to digital conversion in the analog decoder
