PCM3006TG6
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-LSSOP (0.240, 6.00mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e6 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Stereo Audio |
| Terminal Finish | TIN BISMUTH |
| Subcategory | Other Consumer ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | PCM3006 |
| Pin Count | 24 |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 24mA |
| Data Interface | Serial |
| Sampling Rate | 48 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Power Consumption | 54mW |
| Number of A/D Converters | 1 |
| Signal to Noise Ratio (SNR) | 89 dB |
| Resolution (Bits) | 16 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 89 / 93 |
| S/N Ratio, ADCs / DACs (db) Typ | 89 / 93 |
| Number of Analog Outputs | 2 |
| Length | 7.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PCM3006TG6 Overview
Space-saving reasons have led to it being packaged in a 24-LSSOP (0.240, 6.00mm Width) package. It is adopted to package in the Tube way. This electronic component is of the type Stereo Audio, allowing it to provide high-efficiency performance in various applications. The mounting type of this device is Surface Mount. A -25°C~85°C operating performance setting allows it to operate normally. Integrated ADCs / DACs are available in 2 / 2. An analog circuit is supplied with a voltage of 2.7V~3.6V. The digital circuit is provided with the supply voltage of 2.7V~3.6V. Signals are prevented from reflecting off the transmission line's terminations by using 24 terminations. Essentially, it is an electronic device with 24 pins. There are 24 pins on it. The base part number PCM3006 can be used to find related parts. An integrated circuit is mounted on a PCB based on the technology of Surface Mount. Ideally, the supply voltage should remain at 3.6V. Analog signals are converted into digital signals by A/D converters. This electronic part is classified into the subcategory of Other Consumer ICs. It is recommended to maintain a voltage of 2.7V as the minimum value. This device runs on 3V power supplies. 3.3V is the supply voltage that it can operate from. A normal electrical current of 24mA should flow through the circuit at all times. There are 2 analog outputs on the board.
PCM3006TG6 Features
Embedded in the 24-LSSOP (0.240, 6.00mm Width) package
Operating temperature of -25°C~85°C
2 / 2 ADCs / DACs
1 A/D converters
2 analog outputs
PCM3006TG6 Applications
There are a lot of Texas Instruments PCM3006TG6 CODECs Interface ICs applications.
- Robotic arms
- Image denoising
- Textile manufacturing
- Rotating radar platforms
- RF-based home automation system
- Full adders
- Printing
- Robotics vehicle with the metal detector
- Linear measurement
- Advanced breast cancer treatments
