banner_page

PGA280AIPW

4 Channels 15mA per Channel 800pA 140 dB Instrumentational OP Amps 0.002μA 10V~36V ±5V~18V PGA280 24 Pins 24-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-PGA280AIPW
  • Package: 24-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 657
  • Description: 4 Channels 15mA per Channel 800pA 140 dB Instrumentational OP Amps 0.002μA 10V~36V ±5V~18V PGA280 24 Pins 24-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 24
Weight 211.997734mg
Operating Temperature -40°C~105°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
ECCN Code EAR99
Subcategory Instrumentation Amplifier
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 0.65mm
Base Part Number PGA280
Pin Count 24
Output Type Differential
Number of Channels 4
Number of Circuits 1
Operating Supply Current 2.4mA
Nominal Supply Current 2.4mA
Max Supply Current 10mA
Quiescent Current 3mA
Slew Rate 2V/μs
Amplifier Type Programmable Gain
Common Mode Rejection Ratio 140 dB
Current - Input Bias 800pA
Max Input Voltage 15.5V
Voltage - Supply, Single/Dual (±) 10V~36V ±5V~18V
Output Current per Channel 15mA
Input Offset Voltage (Vos) 50μV
Bandwidth 6MHz
Neg Supply Voltage-Nom (Vsup) -15V
Average Bias Current-Max (IIB) 0.002μA
Supply Voltage Limit-Max 20V
Settling Time 20 μs
Dual Supply Voltage 18V
Neg Supply Voltage-Max (Vsup) -20V
Input Offset Current-Max (IIO) 0.002μA
Input Voltage Noise Density 20nV/sqrt Hz
Number of Amplifiers 3
Height 1.2mm
Length 7.8mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

PGA280AIPW Overview


In order to protect the op amps, a 24-TSSOP (0.173, 4.40mm Width) case is used. An op amp of this type is a Programmable Gain-type. The op amp is delivered to you in a Tube case. Linear amplifier has a total of 24 pins. Please take in mind that op amp should be run at 15V. To be specific, this instrumentation amplifier is a type of Instrumentation Amplifier. 24 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 50μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~105°C . Using an 2.4mA supply current, this operational amplifier ics can be operated. There are 1 circuits on this op amp. Buffer op amp is equipped with 4 channels on the device. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Differential signals. 3mA quiescent currents are flowing through buffer op amp. A total of 3 instrumentation amplifiers are present on the device.

PGA280AIPW Features


24 Pins
supply voltage of 15V
Output Type: Differential

PGA280AIPW Applications


There are a lot of Texas Instruments PGA280AIPW Instrumentational OP Amps applications.

  • Scintillation detectors
  • Signal transformation
  • Inverse/same-phase proportional circuit
  • Car stereo
  • Industrial control system
  • Micro signal measurement
  • Radiation thermometry transducers
  • Power transmission
  • Information processing
  • Oscilloscopes

Write a review

Note: HTML is not translated!
    Bad           Good