PI3B3253QEX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 10Ohm |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3253 |
| Operating Supply Voltage | 3.3V |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Number of Ports | 5 |
| Number of Bits | 8 |
| Throw Configuration | 4PST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.2 ns |
| Family | CBTLV/3B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 2 |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PI3B3253QEX Overview
Providing this information in the 16-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.In this case, it is packaged as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.With a supply voltage of 3V~3.6V, designers have greater flexibility of digital controlled switch.It is designed with 16 terminations as part of its basic configuration.The base part number is 3253, which is also useful when looking up signal switch's related components.In multiplexer's system, 3.3V is the voltage supplied.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.This multiplexer ic has 16 pins configured.It is positioned in the direction of Surface Mount.In the CBTLV/3B family, the logic switch is included.In the signal multiplexer, there are 8 bits available.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.63V.In electronic terms, the digital switch ic is classified as part number Other Logic ICs.Without the influence of external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 3.3V, reliable performance of the multiplexers can be achieved.A resistance of 5 is used to operate the signal switching.With a resistance of 10Ohm, it operates.Signal sources consist of output lines of 2.
PI3B3253QEX Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
2 output lines
PI3B3253QEX Applications
There are a lot of Diodes Incorporated PI3B3253QEX Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Encrypted communications system
- Steel plants
- Memory system of computers
- Arithmetic Logic Units
- Microprocessor memory systems
- Data demultiplexing
- Logic circuits
- To select different devices in microprocessor input
- Data transfer
