PI5C3861Q
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Terminal Finish | MATTE TIN (787) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 3861 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 0.25 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
PI5C3861Q Overview
For the purpose of saving board space, digital switch is included in the 24-SSOP (0.154, 3.90mm Width).Tube is the method used for packaging.For mounting, digital switch ic uses the method Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Among its basic configurations are 24 terminations.There is a base part number 3861 that can be used to locate signal switch's related components as well.In this case, 5V is the voltage supplied to the multiplexer's system.It employs GULL WING as the point at which conductors come to an end.The logic switch is included into the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits that are provided.To avoid unnecessary failures, keep the supply voltage at 4.75V (Vsup).In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.25V.There is a power supply provided for the mux switch's normal operation of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.The resistance of the signal switching is 2.
PI5C3861Q Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Power supplies of 5V
PI5C3861Q Applications
There are a lot of Diodes Incorporated PI5C3861Q Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Night vision cameras
- LVDS
- Idle motor
- Time division multiplexing system
- Telephone network
- Arithmetic Logic Units
- Paper plants
- Code conversion
- Relay
