Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2010 |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Clock Drivers |
Voltage - Supply |
3V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
PI6C2405 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Number of Circuits |
1 |
Nominal Supply Current |
54mA |
Frequency (Max) |
133MHz |
Family |
6C |
Input |
TTL |
Ratio - Input:Output |
1:5 |
PLL |
Yes |
Differential - Input:Output |
No/No |
Propagation Delay (tpd) |
0.3 ns |
Same Edge Skew-Max (tskwd) |
0.2 ns |
Number of True Outputs |
5 |
Length |
4.45mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
PI6C2405A-1HLE Overview
As a clock IC, it is packaged by the Tube method. In the 8-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 8 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be TTL. For a full understanding of the electronic part's performance, 1 circuits are implemented. 133MHz is the maximal value for normal operation. PLL clock is mounted in the way of Surface Mount. It would take a maximum supply voltage of 3.6V to operate this time clock generator. It is safe to use this frequency synthesizer with a supply voltage above 3V. Clock generator ic works with 3V~3.6V. Based on test statistics, ambient temperature should be set at 0°C~70°C. Zero Delay Buffer is the type of electrical part that this component is classified as. According to the base part number PI6C2405, its related parts can be found. The clock PLL has 8 pins that are available. Clock PLL is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. At maximum 0.2 ns, this analog clock generator has low timing skew. There are 5 pins that are configured to enable high true output on this analog clock generator. By searching for the 6C family, it is possible to find similar electrical components.
PI6C2405A-1HLE Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
5 true outputs
PI6C2405A-1HLE Applications
There are a lot of Diodes Incorporated PI6C2405A-1HLE Clock Generators applications.
- FM demodulation networks for FM operations
- Sampling clocks for ADC and DAC
- High-speed communication applications
- Phase modulation cellular systems
- Laptops
- Clock recovery
- FSK demodulators
- Fiber Channel
- Coherent carrier tracking
- Mobile telephones