PIC16F57T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 2 V MINIMUM SUPPLY @ 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F57 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Memory Size | 3kB |
| Oscillator Type | External |
| Number of I/O | 20 |
| RAM Size | 72 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3KB 2K x 12 |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| On Chip Program ROM Width | 12 |
| CPU Family | PIC |
| Height Seated (Max) | 2.64mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F57T-I/SO Overview
To save space, it is included in the 28-SOIC (0.295, 7.50mm Width) package. The way of Surface Mount is used to mount it. It comes in the package?of a Tape & Reel (TR). A PIC core processor powers the device. Work should be performed at a temperature of -40°C~85°C TA. It has a type of program memory of FLASH. 20 I/Os have been provided by the device. Based on the PIC16F57 base part number, it can be compared with other components. The position of the device is DUAL at terminal. As far as terminations are concerned, there are 28 terminations present. Part of the PIC? 16F series, this electrical component is used in a variety of applications. Using the 3V supply voltage allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 28 pins are used to construct it. It is mounted based on the method of Surface Mount. A total of 28 pins are attached to it. In Microcontrollers, this component is included. The devices have a maximum memory size of 3kB that can be used to store programs and data. Supply current cannot exceed 7mA. Power is provided by a 2/5.5V source. The system is highly efficient when working at a frequency of 20MHz. 1 timers/counters are in use. The part is a part of the PIC CPU family. OPERATES AT 2 V MINIMUM SUPPLY @ 4 MHZ also belongs to it. Vsup should be kept above 2V for normal operation. It works with an oscillator type External.
PIC16F57T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F57T-I/SO Applications
There are a lot of Microchip Technology PIC16F57T-I/SO Microcontroller applications.
- Entertainment-radios, CD players, televisions
- Toys
- Blenders
- Magnetic resonance imaging (MRI)
- Copiers
- DCS control intelligent sensor
- Data acquisition and control
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Routers
- X-ray
