PIC16F631T-I/ML
| Parameters | |
|---|---|
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 17 |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F631 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Memory Size | 1.5kB |
| Oscillator Type | Internal |
| Number of I/O | 18 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
PIC16F631T-I/ML Overview
Due to the benefits of saving space, it is available in the 20-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. It comes in a Tape & Reel (TR) package. A PIC core processor powers the device. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 18 I/Os can be found on it. To find comparable components, use the PIC16F631 base part number. The terminals of this device are set to QUAD. It consists of 20 terminationals. The PIC? 16F series contains this electrical component. Because the supply voltage is 5V, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 20 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. This device has a total of 20 pins. It is one of the components included in Microcontrollers. The devices have a maximum memory size of 1.5kB that can be used to store programs and data. When working at a frequency of 20MHz it is able to achieve excellent efficiency. While deploying 5V, designers will be able to fully take advantage of its adaptability. There are currently 2 timers/counters set up on the system. The part is a part of the PIC CPU family. There are a total of 17 programmable I/Os available. There is an oscillator type Internal used in this circuit.
PIC16F631T-I/ML Features
20-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F631T-I/ML Applications
There are a lot of Microchip Technology PIC16F631T-I/ML Microcontroller applications.
- Ipad
- Data acquisition and control
- Oil and gas
- DCS control intelligent sensor
- Firewalls
- Aerospace navigation systems
- Safety -airbags, automatic braking system (ABS)
- Hearing aids
- Multi-meter
- Laminators
