PIC16F876A-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F876A |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | External |
| Number of I/O | 22 |
| RAM Size | 368 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 5x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F876A-E/ML Overview
For the purpose of saving space, it is available in the 28-VQFN Exposed Pad package. Mounted using Surface Mount. In the package Tube, it is included. With a processor of PIC cores, the device is powered. When working, the temperature should be kept at -40°C~125°C TA. Memory type FLASH is used for program memory. A total of 22 I/Os are present. A comparable component can be found by using the base part number PIC16F876A. At QUAD, it has its terminals. This circuit consists of 28 terminationals. Part of the PIC? 16F series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 28 pins are required to construct this device. According to Surface Mount, it is mounted. There are a total of 28 pins on it. The component is included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 14kB. A maximum supply current of 15mA is set. It is powered by a 5V?source. The system is highly efficient when working at a frequency of 20MHz. The supply voltage of 5V's adaptability can be fully utilised by designers. 3 timers/counters are in use. It is part of the PIC CPU family. Using an oscillator type of External, it works.
PIC16F876A-E/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F876A-E/ML Applications
There are a lot of Microchip Technology PIC16F876A-E/ML Microcontroller applications.
- Teletext terminals
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Computer/laptop
- Answering machines
- Smartphone
- Radio
- Ipad
- DCS control intelligent sensor
- Projector
- Data acquisition and control
