PIC16F883T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ITS ALSO OPERATES MINIMUM 2V AT 8 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F883 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 4.8mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F883T-I/SS Overview
It is available in the 28-SSOP (0.209, 5.30mm Width) package for the benefit of saving space. Using Surface Mount, it is mounted. It comes in a Tape & Reel (TR) package. With a processor of PIC cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. There is FLASH program memory in it. A total of 24 I/Os are present. To find equivalent components, use its PIC16F883 base part number. The terminals of this device are set to DUAL. As far as terminations are concerned, there are 28 terminations present. The electrical component is part of the series PIC? 16F. Because the supply voltage is 5V, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 28 pins are required to construct this device. The mounting of this device is carried out following the method of Surface Mount. It is equipped with 28 pins in total. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 7kB which may be used to store programs and data. It is important to note that the maximum supply current is 4.8mA. A 2.5/5V power source powers it. It performs extremely well at a frequency of 20MHz. The number of timers and counters is 3. It belongs to the PIC CPU family. It has the property of ITS ALSO OPERATES MINIMUM 2V AT 8 MHZ as well. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. There is an oscillator type Internal used in this circuit.
PIC16F883T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F883T-I/SS Applications
There are a lot of Microchip Technology PIC16F883T-I/SS Microcontroller applications.
- Fire detection & safety devices
- Smartphone
- Mice
- Electronic jamming systems
- Auto-breaking system
- Petrochemical
- Smartphones-calling, video calling, texting, email
- Magnetic resonance imaging (MRI)
- Industrial robot
- Fire alarms
