PIC18F1320T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 18F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18F1320 |
| Pin Count | 18 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 4.2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | UART/USART |
| Supply Current-Max | 15mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 16 |
| RAM (words) | 256 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18F1320T-I/SO Overview
A space-saving advantage is that it is included in the 18-SOIC (0.295, 7.50mm Width) package. Using Surface Mount, it is mounted. It comes in the package?of a Tape & Reel (TR). With a processor of PIC cores, the device is powered. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory it uses is FLASH. 16 I/Os have been provided by the device. A component with the same part number as PIC18F1320 can be compared to other similar components. DUAL is the position of its terminals on the board. In this case, there are 18 terminationals. This electrical component is part of the PIC? 18F series. It is possible to achieve high efficiency with a 5V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. It is constructed using 18 pins. The mounting of this device is carried out following the method of Surface Mount. In total, it has 18 pins. It belongs to the subcategory Microcontrollers. Data and programs may be stored on the devices which have a memory size of 8kB. In this case, 15mA represents the maximum current supply. A 5V source of power is being used to run it. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. While deploying 5V, designers will be able to fully take advantage of its adaptability. 4 timer/counters are present. There is an oscillator type Internal used in this circuit.
PIC18F1320T-I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18F1320T-I/SO Applications
There are a lot of Microchip Technology PIC18F1320T-I/SO Microcontroller applications.
- Accu-check
- Routers
- Dialysis machines (performs function of liver)
- Christmas lights
- Playstation
- Smoke alarms
- Blenders
- DCS control intelligent sensor
- Coffee machines
- Wastewater treatment
