PIC18LF25J10-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 18J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC18LF25J10 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 2.7V |
| Power Supplies | 2.5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 22mA |
| Bit Size | 8 |
| Data Converter | A/D 10x10b |
| Watchdog Timer | Yes |
| Access Time | 40 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 16 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC18LF25J10-I/SS Overview
For the purpose of saving space, it is available in the 28-SSOP (0.209, 5.30mm Width) package. Surface Mount is used for mounting. In the package Tube, it is included. It is equipped with a PIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. It has a type of program memory of FLASH. A total of 21 I/Os are available on this device. To find comparable components, use the PIC18LF25J10 base part number. DUAL is the location of its terminals. 28 terminations are present in it. The electrical component is part of the series PIC? 18J. The supply voltage of 2.5V allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. The structure is constructed from 28 pins. During the mounting process, the device is mounted based on the Surface Mount method. 28 pins are on it in total. It is one of the components included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 32kB. There is a maximum current supply of 22mA. A 2.5V source of power is being used to run it. It is highly efficient when it works at a frequency of 40MHz. 3 counters/timers are currently active. Moreover, it also has the property of ALSO OPERATES AT 2V MINIMUM SUPPLY AT 4 MHZ. Using an oscillator type Internal, it operates.
PIC18LF25J10-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC18LF25J10-I/SS Applications
There are a lot of Microchip Technology PIC18LF25J10-I/SS Microcontroller applications.
- Electromechanical control
- Communication-bluetooth, Wi-Fi, radio
- Temperature sensing and controlling devices
- Computer/laptop
- Gas monitoring systems
- Volt meter
- Tape drives
- Printers
- Switches
- Paper shredders
