PIC24HJ256GP610AT-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ256GP610A |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| ROM (words) | 262144 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24HJ256GP610AT-I/PF Overview
To save space, it is included in the 100-TQFP package. Surface Mount is the way to mount it. You can find it in the package of Tape & Reel (TR). A PIC core processor powers the device. Work should be done at -40°C~85°C TA. There is FLASH program memory in it. A total of 85 I/Os are present. It has a part number of PIC24HJ256GP610A that can be used to locate similar components. A QUAD position is assigned to its terminals. In this case, there are 100 terminationals. Part of the PIC? 24H series, this electrical component is used in a variety of applications. As a result of the 3.3V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A total of 100 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. This device has a total of 100 pins. It is one of the components included in Microcontrollers. Memory size for the devices is 256kB, which can be used to store programs and data. When working at a frequency of 40MHz it is able to achieve excellent efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. 9 timers/counters are in use. This part is an integral part of the PIC CPU family. An oscillator of type Internal is used.
PIC24HJ256GP610AT-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ256GP610AT-I/PF Applications
There are a lot of Microchip Technology PIC24HJ256GP610AT-I/PF Microcontroller applications.
- Pacemakers (used to control abnormal heart rhythm)
- Robots
- Ipad
- Mobile computers
- Telephone sets
- Glucose monitoring systems (for Type 1 Diabetes)
- Current meter
- Gas monitoring systems
- Smart highways (navigation, traffic control, information monitoring and car service)
- Blood pressure monitors
