PL123-05SI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PL123 |
| JESD-30 Code | R-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 134MHz |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.35 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Number of True Outputs | 5 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
PL123-05SI Overview
Clock ICs are packaged using the Tube method. This clock generator is embedded in the 8-SOIC (0.154, 3.90mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains a total of 8 terminations within RF synthesizer. This time clock generator should be voltaged at 3.3V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. 1 circuits are implemented to access the electronic component's full performance. Providing a maximum frequency of 134MHz, this clock-based RF synthesizer is suitable for a variety of applications. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. It would take a maximum supply voltage of 3.6V to operate this time clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. According to the base part number PL123, its related parts can be found. At 0.25 ns Max, this analog clock generator exhibits low timing skew. A analog clock generator with 5 true output enable pins is configured for this application.
PL123-05SI Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
5 true outputs
PL123-05SI Applications
There are a lot of Microchip Technology PL123-05SI Clock Generators applications.
- Mechanical devices
- Wireless infrastructure
- Integrated phase noise in aerospace systems
- Infotainment systems
- Picocells, femtocells and small cells
- Signal analyzer
- Frequency synthesis
- FMCW Radar
- Frequency shifting decodes
- Microwave point-to-point systems
