PLF0G122MDO1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Number of Pins | 2 |
| Dielectric Material | Aluminium |
| Weight | 1.500002g |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2007 |
| Series | PLF |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Silver (Ag) |
| Applications | General Purpose |
| Capacitance | 1200μF |
| Voltage - Rated DC | 4V |
| Lead Pitch | 5mm |
| Lead Length | 19mm |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Polarity | Polar |
| Lead Spacing | 0.197 5.00mm |
| Rated (DC) Voltage (URdc) | 4V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 960μA |
| Ripple Current | 5.6A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.08 |
| Ripple Current @ High Frequency | 5.6A @ 100kHz |
| Diameter | 10mm |
| Height | 13mm |
| Height Seated (Max) | 0.512 13.00mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 1200μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF0G122MDO1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF0G122MDO1 is suitable to conduct the ripple current at 5.6A. PLF0G122MDO1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. There are 2 terminals embeded in PLF0G122MDO1 Capacitor. There are 960μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The dielectric materials are defined as Aluminium. There are 2 pins available in the part.
PLF Series
Capacitance: 1200μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF0G122MDO1 Aluminum Polymer Capacitors.
Typically, PLF0G122MDO1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Start
- Coupling or blocking
- DC Buffering
- Power Factor Correction
- Signal decoupling & power bypass
- Voltage Doubling
- Lighting Ballast
- To reduce power noise & signal noise
- PFC
- Spot Welding
