PLS0G681MDO1TD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2015 |
| Series | PLS |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 680μF |
| Voltage - Rated DC | 4V |
| Lead Pitch | 3.5052mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Lead Spacing | 0.138 3.50mm |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 544μA |
| Ripple Current | 5.8A |
| Life (Hours) | 5000 hours |
| Ripple Current @ High Frequency | 5.8A @ 100kHz |
| Height Seated (Max) | 0.472 12.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 680μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLS series. This part is mounted in the way of Through Hole. The type of the PLS0G681MDO1TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLS0G681MDO1TD is suitable to conduct the ripple current at 5.8A. PLS0G681MDO1TD Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. PLS0G681MDO1TD Capacitor. There are 544μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
PLS Series
Capacitance: 680μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLS0G681MDO1TD Aluminum Polymer Capacitors.
Typically, PLS0G681MDO1TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Frequency Converters
- PFC
- Voltage Doubling
- Smoothing Noise Filtering
- Audio Crossover
- Flashtube Ignition
- Computer motherboards
- Motor Control
- To reduce power noise & signal noise
- Lighting Ballast
