PT65301
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Material | Phosphor Bronze |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Body Material | Thermoplastic |
| Actuator Material | Polyamide |
| Terminal Material | BRASS |
| Operating Temperature | -20°C~70°C |
| Packaging | Tube |
| Series | PT65 |
| JESD-609 Code | e3 |
| Feature | Sealed - Flux Protection |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Solder |
| ECCN Code | EAR99 |
| Number of Positions | 10 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Rated | 24VDC |
| Additional Feature | O-RING Si RUBBER ACTUATOR SEAL |
| HTS Code | 8536.50.90.20 |
| Voltage - Rated DC | 24V |
| Pitch | 0.100 2.54mm Full |
| Packing Method | TRAY |
| Orientation | Straight |
| Terminal Pitch | 2.54mm |
| Current Rating | 400mA |
| Contact Finish | Gold |
| Termination Style | PC Pin |
| Actuator Type | Rotary with Shaft |
| Circuit | BCD |
| Contact Resistance | 0.08mOhm |
| Insulation Resistance | 100MOhm |
| Contact Current(DC)-Max | 0.4A |
| Sealing | MOLDED |
| Throw Configuration | SP10T |
| Max Voltage Rating (DC) | 24V |
| Mechanical Life | 10,000 Cycles |
| Switch Type | ROTARY CODED SWITCH |
| Contact Current Rating | 150mA |
| Switching Voltage | 24V |
| Contact Timing | BREAK-BEFORE-MAKE |
| Index Angle | 36 deg |
| Number of Switch Sections | 1 |
| PCB Hole Count | 6 |
| Contact Function | ON-OFF |
| Washable | Yes |
| Actuator Level | Raised |
| Solderability | WAVE |
| Switching Current | 400mA |
| Washability | SOLVENT |
| Length | 0.393 10.00mm |
| Body Height | 6.5mm |
| Actuator Length | 7.3mm |
| Height Above Board | 0.543 13.80mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Flammability Rating | UL94 V-0 |
See Relate Datesheet
