QS18VP6FF100Q8
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Housing Material | ABS |
| Operating Temperature | -20°C~70°C |
| Published | 2014 |
| Series | QS18 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IP67 |
| Output Configuration | PNP |
| Output Current | 100mA |
| Response Time | 850μs |
| Adjustment Type | Fixed |
| Sensing Distance | 3.937 (100mm) |
| Sensing Method | Proximity |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector, M12 |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
QS18VP6FF100Q8 Overview
For reliable performance, set the photoelectric sensor to -20°C~70°C. For these electronic components to work, the voltage should be provided by 10V~30V. An ideal response time for photoelectric sensors is 850μs. To make the photoelectric sensor work, you have to connect the 4 pins. Photoelectric sensors must have an output current of 100mA in order to operate. When applied to a DC circuit, the maximum voltage that can be applied to the photoelectric sensor without damaging it is 30V. Using a voltage as low as possible, such as 10V, this photoelectric sensor can operate.
QS18VP6FF100Q8 Features
Sensing Distance: 3.937 (100mm)
4 pins
Response Time: 850μs
Operating Temperature: -20°C~70°C
QS18 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
QS18VP6FF100Q8 Applications
There are a lot of Banner Engineering Corporation QS18VP6FF100Q8 Photoelectric Sensors applications.
- Counting small objects
- Monitoring bigger areas for objects with light grids
- Zone scanners
- Passive infrared sensors
- Logistics and materials handling
- Mechanical engineering
- Automotive industry
- Checking objects on production lines or conveyors
- Material handling
- Detecting colours
