QS3245QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 8 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Family | 3245 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Drain to Source Resistance | 15Ohm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3245QG Overview
For the purpose of saving board space, digital switch is included in the QSOP.Among its basic features are 20 terminations.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 20 component pins.As a result, GULL WING represents the end of the conductors.In this case, Single is employed as the supply type.The board is configured with 20 pins.The mounting is in the way of Surface Mount.The logic switch is a member of the 3245 family.Signal multiplexer consists of 8 bits.Normally, 5V is powered by a battery.Bus Driver/Transceivers is a category for the digital switch ics.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.With a resistance of 15Ohm, it operates.There is no problem with operating this signal switch at the maximum temperature of 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.25V.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4.75V.It also provides improved characteristics of TTL COMPATIBLE BUS SWITCH.In order to implement its logic, it makes use of IC BUS DRIVER.
QS3245QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
QS3245QG Applications
There are a lot of Integrated Device Technology (IDT) QS3245QG Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Metal detectors
- Enabling different rows of memory depending on address in memory chips
- Electronic circuits
- Solenoid cooling fan
- HD surveillance system
- Data collection system
- Arithmetic Logic Units
- Idle motor
- Telephone network
