QS3L384PAG
| Parameters | |
|---|---|
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 3μA |
| Family | 3L |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 2 |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
QS3L384PAG Overview
Digital switch is provided in the TSSOP for the purpose of saving board space.Its basic configuration includes terminations in the 24 range.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 24 is found on this turn signal switch.A conductor terminates at GULL WING.Its supply type is Single, which is used as the source of power.The board has 24 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of 3L.Signal multiplexer contains 10 bits.In order to maintain mux switch's normal operation, power is provided to 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.As far as the resistance is concerned, it operates with 2.A maximum temperature of 85°C is acceptable for this signal switch.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.It is specified that the signal switches should operate at 5.25V as its maximum supply voltage.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 4.75V.In addition, TTL COMPATIBLE BUS SWITCH provides improved characteristics.IC BUS DRIVER is used for the logic of this chip.
QS3L384PAG Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
QS3L384PAG Applications
There are a lot of Integrated Device Technology (IDT) QS3L384PAG Signal Switches / Multiplexers / Decoders applications.
- Data distribution
- GLAN
- To select different devices in microprocessor output
- Memory chips
- Time division multiplexing system
- Data transfer
- High-performance memory-decoding applications
- Medical industry
- Injectors
- Control unit of Central Processing unit (CPU)
