REG710NA-5/250
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | REG710 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 30mA |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.25V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Output Configuration | Positive |
| Quiescent Current | 65μA |
| Max Output Voltage | 5.3V |
| Topology | Charge Pump |
| Frequency - Switching | 1MHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 4.7V |
| Switcher Configuration | DOUBLER INVERTER |
| Nominal Output Voltage | 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
REG710NA-5/250 Overview
For optimal performance, this voltage regulator uses the Cut Tape (CT) package. A voltage regulator consists of 6 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHED CAPACITOR CONVERTER. Space-saving SOT-23-6 packages are available for this harley voltage regulator. There are 1 outputs on DC DC switching regulator. ICs such as this voltage regulator are capable of generating Fixed outputs through their output pins. A Surface Mount mounting is required for this switching regulator. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. The switching frequency of this DC-DC switching regulator reaches 1MHz. Despite its low input voltage, this voltage regulator can operate. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. An input voltage of 3.25V is required to meet the requirements of the switching regulator operation. The regulator voltage that you are looking at belongs to the subcategory Other Analog ICs. The REG710 family of DC/DC regulators includes this DC/DC regulator. There is a possibility that DC DC switching regulator can give voltage at 5V volts. In order to operate voltage regulator, there are 6 pins that must be connected. There should be at least a 4.7V volt output voltage for this switching regulator in order to make it work properly. Voltage regulator's maximal output current reaches 30mA A to meet the operation requirements. The maximum output voltage of this regulator voltage is 5.3V. There are no external factors that affect DC DC switching regulator's consumption of 65μA A of quiescent current. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 1.8V V. DC DC switching regulator can be operated from a voltage of 5.5V as its maximum supply voltage.
REG710NA-5/250 Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
REG710NA-5/250 Applications
There are a lot of Texas Instruments REG710NA-5/250 Voltage Regulators applications.
- Power supplies of electronic gadgets
- Flexible manufacturing cells
- Machining centers
- Smart grid
- Printing
- Combined machine tools
- Industrial robots
- Drilling machines
- Computer monitoring equipment of building
- Wind power
