RFPIC12F675FT-I/SS
| Parameters | |
|---|---|
| CPU Family | PIC |
| Number of ADC Channels | 4 |
| Current - Transmitting | 14mA |
| Controller Series | rfPIC™ |
| Height Seated (Max) | 1.98mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 453.59237mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PIC® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | RKE, Security Systems |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 450MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | RFPIC12F675F |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Interface | USB |
| Memory Size | 1.8kB |
| Number of I/O | 6 |
| RAM Size | 64 x 8 |
| Memory Type | FLASH |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Program Memory Type | FLASH (1.75kB) |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Rate | 40 kbps |
| Data Bus Width | 8b |
| PWM Channels | NO |
| Number of Timers/Counters | 2 |
| On Chip Program ROM Width | 14 |
RFPIC12F675FT-I/SS Overview
In light of its outstanding performance, it is an ideal choice for RKE, Security Systems.There is a 20-SSOP (0.209, 5.30mm Width) package available to save space.Surface Mount is used for mounting.Tape & Reel (TR) is the package that contains it.PIC core processor is present on the device.In order to work effectively, the temperature should be kept at -40°C~85°C.FLASH (1.75kB) is the type of program memory used by it.Because the supply voltage is 2V~5.5V, high efficiency can be achieved.The device has 6 I/Os.Based on its base part number of RFPIC12F675F, other similarly-sized components can be found.DUAL is the position of its terminals on the board.Application Specific Microcontroller is a member of the rfPIC? controller series.20 terminations are present in it.The PIC? series contains this electrical component.Because the supply voltage is 5V, high efficiency can be achieved.FLASH is its memory type for data storage.MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget.20 pins are used to construct it.This mount is done in accordance with the method of Surface Mount.20 pins are on it in total.In Microcontrollers, this component is included.Using the devices' 1.8kB memory size, you can store programs and data.When working at a frequency of 450MHz it is able to achieve excellent efficiency.In order to fully utilize its adaptability, designers can utilize the supply voltage of 5V in their designs.A total of 2 timers/counters have been set up.This part is part of the PIC family of CPUs.
RFPIC12F675FT-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
RFPIC12F675FT-I/SS Applications
There are a lot of Microchip Technology RFPIC12F675FT-I/SS Microcontroller applications.
- Smart instruments
- Aerospace navigation systems
- Wastewater treatment
- Paper shredders
- Smoke alarms
- Embedded gateways
- Calculators
- Virtual reality VR robots
- Answering machines
- Accu-check
