RS80G561MDNASQPX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Published | 2015 |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 4V |
| HTS Code | 8532.22.00 |
| Capacitance | 560μF |
| Packing Method | TAPE |
| Terminal Pitch | 5mm |
| Lead Pitch | 2.4892mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Rated (DC) Voltage (URdc) | 4V |
| Leakage Current | 0.56mA |
| Ripple Current | 5.6A |
| Life (Hours) | 5000 hours |
| Tan Delta | 0.1 |
| Diameter | 6.3mm |
| Height Seated (Max) | 8.9916mm |
| Length | 8mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 560μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RS80G561MDNASQPX capacitor Nichicon RS80G561MDNASQPX is suitable to conduct the ripple current at 5.6A. RS80G561MDNASQPX Capacitor is mounted by Through Hole. There are 2 terminals embeded in RS80G561MDNASQPX Capacitor. There are 0.56mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 4V. The part is packaged by TAPE. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 560μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RS80G561MDNASQPX Aluminum Polymer Capacitors.
Typically, RS80G561MDNASQPX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Lighting Ballast
- Server motherboards
- Motor Start
- Audio Crossover
- To reduce power noise & signal noise
- Coupling or blocking
- Spot Welding
- Flashtube Ignition
- Signal decoupling & power bypass
- Motor Control
