RS80J561MDN1PX
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8532.22.00 |
| Capacitance | 560μF |
| Voltage - Rated DC | 6.3V |
| Packing Method | TAPE |
| Terminal Pitch | 5mm |
| Lead Pitch | 2.4892mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Polarity | Polar |
| Lead Diameter | 600 μm |
| Voltage | 6.3V |
| Ripple Current | 5A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.1 |
| Dissipation Factor | 0.1 % |
| Current - Leakage | 882μA |
| Diameter | 6.3mm |
| Height | 8mm |
| Height Seated (Max) | 8.9916mm |
| Length | 8mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 560μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. The type of the RS80J561MDN1PX capacitor Nichicon RS80J561MDN1PX is suitable to conduct the ripple current at 5A. RS80J561MDN1PX Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in RS80J561MDN1PX Capacitor. The part is packaged by TAPE. The voltage for the part is specified as 6.3V volts. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 560μF
Tolerance: 20%
Package / Case: Radial
There are great quantities of applications of RS80J561MDN1PX Aluminum Polymer Capacitors.
Typically, RS80J561MDN1PX is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Decoupling Noise Filtering
- UPS Buffering
- To enhance power efficiency
- DC Buffering
- DC Link
- Flashtube Ignition
- Computer motherboards
- Power Factor Correction
- Power Line Buffering
- To reduce power noise & signal noise
