RT9715CGBG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~100°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Load Discharge, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 90mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.939mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 90m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
RT9715CGBG Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package SC-74A, SOT-753 contains it.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of USB Switch.It is recommended that the temperature be set to -40°C~100°C TJ for reliable performance.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.Features of the lighting driver are Load Discharge, Status Flag.It consists of 5 terminations in total.It is necessary to use the 5 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 1.5A when operation criteria are met.Supply voltages of 5V allow for high efficiency.It has a resistance of 90mOhm.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.
RT9715CGBG Features
Supplied from 5V
Resistance of 90mOhm
RT9715CGBG Applications
There are a lot of Richtek USA Inc. RT9715CGBG Power Switches ICs applications.
- Hot Swap
- Mobile Communication Devices
- Solid State Drivers
- Set-top-box
- Wireless Headsets
- PDAs
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- USB Protection
- Hard Disk Drives
