SA5534PSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | SA5534 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Circuits | 1 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 8mA |
| Output Current | 38mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 38mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES AVCL>=3 |
| Supply Voltage Limit-Max | 22V |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 10MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.3μA |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SA5534PSR Overview
The linear amplifier is packaged in a 8-SOIC (0.209, 5.30mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . As long as the supply current of the chip does not exceed 4mA, this op amp ic can operate. The voltage gain should stay at 100dB. On this buffer amplifier, there are 1 circuits. The operating supply voltage of the buffer op amp is rated at 15V. An buffer amplifier is packed in a TR-shape according to the design.
SA5534PSR Features
8 Pins
supply voltage of 15V
100dB voltage gain
SA5534PSR Applications
There are a lot of Texas Instruments SA5534PSR Instrumentational OP Amps applications.
- PDA
- Professional videography
- High speed sample
- Power control
- Power generator
- Vehicle electronics
- Broadcasting
- Radiation thermometry transducers
- Signal amplification
- Biopotential
