Parameters |
Mounting Type |
Surface Mount |
Package / Case |
48-LQFP |
Surface Mount |
YES |
Packaging |
Tray |
Published |
2000 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
Additional Feature |
ALSO OPERATES AT 2.5V SUPPLY |
HTS Code |
8542.31.00.01 |
Technology |
CMOS |
Voltage - Supply |
2.5V 3.3V 5V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Reach Compliance Code |
unknown |
Base Part Number |
SC16C652 |
Pin Count |
48 |
JESD-30 Code |
S-PQFP-G48 |
Qualification Status |
Not Qualified |
Operating Temperature (Max) |
85°C |
Operating Temperature (Min) |
-40°C |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
2, DUART |
uPs/uCs/Peripheral ICs Type |
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
Clock Frequency |
80MHz |
Address Bus Width |
3 |
Boundary Scan |
NO |
Low Power Mode |
YES |
External Data Bus Width |
8 |
Data Rate (Max) |
5Mbps |
Number of Serial I/Os |
2 |
Data Transfer Rate-Max |
0.625 MBps |
Communication Protocol |
ASYNC, BIT |
FIFO's |
32 Byte |
With Modem Control |
Yes |
Height Seated (Max) |
1.6mm |
Length |
7mm |
Width |
7mm |
RoHS Status |
ROHS3 Compliant |
SC16C652IB48,151 Overview
There is a cost-effective package 48-LQFP available.The transmission is conducted over 2, DUART channels.Tray is adopted as the packaging option.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configured with 48 terminations.The supply voltage of 3.3V is provided for its operation.The current status of this electronic part is Obsolete.As a way to communicate data, the board has 2 serial I/Os.A method of mounting it is through Surface Mount.In order for it to operate, a voltage of 2.5V 3.3V 5V must be applied.An 48-pin integrated circuit is what this particular device is.There is a 80MHz clock frequency for this IC.Temperatures as high as 85°C can be reached by the device.Furthermore, it has the ability to perform ALSO OPERATES AT 2.5V SUPPLY as well.SC16C652 is set as the base part number for the part.A minimum of -40°C is required for operation.
SC16C652IB48,151 Features
2 serial I/Os
Clock frequency of 80MHz
ALSO OPERATES AT 2.5V SUPPLY
SC16C652IB48,151 Applications
There are a lot of NXP USA Inc. SC16C652IB48,151 UARTs applications.
- GPS Devices
- DTE for Modem Communication Systems
- Factory Automation and Process Controls
- Point-of- Sale Terminals
- Communications equipment
- Handheld Terminals and Tablets
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Portable and battery operated devices
- Factory Automation
- Personal Digital Assistants Modules