SC16C750BIA44,518
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Silver (Sn/Ag) |
| Additional Feature | ALSO OPERATES AT 2.5 V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC16C750 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 2.5/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 4.57mm |
| Length | 16.585mm |
| Width | 16.585mm |
| RoHS Status | ROHS3 Compliant |
SC16C750BIA44,518 Overview
The package 44-LCC (J-Lead) offers the best value.The transmission of data takes place over 1, UART channels.As far as packaging is concerned, Tape & Reel (TR) is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.The configuration uses 44 terminations.For its operation, it requires a supply voltage of 5V.As of right now, this electronic part is in a Obsolete status.As a means of communicating data, there are 1 serial I/Os available.You can mount it by using Surface Mount.During operation, the supply voltage is set to 2.5V 3.3V 5V.UART is a type of 44-pin integrated circuUART.A frequency of 48MHz is measured for this IC.A series of similarities lead us to include it in the subcategory of Serial IO/Communication Controllers.UART can operate at a maximum temperature of 85°C.UART is reliable and efficient for electronic designers to use when power supplies of 2.5/5V are provided.Moreover, it is also able to perform ALSO OPERATES AT 2.5 V SUPPLY.A base part number of SC16C750 is used for this product.In order to operate, the device must be kept at a minimum temperature of -40°C.
SC16C750BIA44,518 Features
1 serial I/Os
Clock frequency of 48MHz
Power supplies of 2.5/5V
ALSO OPERATES AT 2.5 V SUPPLY
SC16C750BIA44,518 Applications
There are a lot of NXP USA Inc. SC16C750BIA44,518 UARTs applications.
- Cellular Phones DataPort
- Multimedia Systems
- Portable Applications
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Telecommunication Network Routers
- Personal Digital Assistants Modules
- Wireless Infrared Data Communications Systems
- Remote Access Servers
- DTE for Modem Communication Systems
- White goods
