SC26C92C1B-T
| Parameters | |
|---|---|
| Package / Case | PQFP |
| Surface Mount | YES |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Terminal Finish | TIN |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 15 |
| Nominal Supply Current | 10mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Data Rate | 230.4 kbps |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC26C92C1B-T Overview
The PQFP package is the most cost-effective.Transmission is carried out over 2 channels.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.In its configuration, 44 terminations are used.This device is powered by a voltage of 5V.As a means of transferring data, there are 2 serial I/Os.In this IC, the clock frequency is 8MHz.To maintain normal work for a long time, the operating temperature should not exceed -40°C.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 70°C.Keeping the supply voltage below 5.5V will ensure reliability.Supply voltages above 4.5V are known to ensure reliability.In order to achieve high efficiency, it is provided with the supply voltage of 5V.There are 15 I/Os designed to transfer data.
SC26C92C1B-T Features
2 serial I/Os
Clock frequency of 8MHz
Operating supply voltage of 5V
15 I/Os
SC26C92C1B-T Applications
There are a lot of NXP Semiconductors / Freescale SC26C92C1B-T UARTs applications.
- Personal Digital Assistants Modules
- Ethernet Network to Serial Ports
- Ethernet Network Routers
- GPS Devices
- Factory Automation and Process Controls
- Router C ontrol
- Remote Access Servers
- Handheld Terminals and Tablets
- Handheld Computers
- Point-of- Sale Terminals
