SC26C92C1B,528
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-QFP |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC26C92 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 2, DUART |
| Number of I/O | 15 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 8MHz |
| Supply Current-Max | 25mA |
| Address Bus Width | 4 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 1Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.125 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 8 Byte |
| With Modem Control | Yes |
| Height Seated (Max) | 2.1mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
SC26C92C1B,528 Overview
This product is available in a cost-effective package called 44-QFP.The transmission of data takes place over 2, DUART channels.Tape & Reel (TR) is adopted as the packaging option.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.Configured with 44 terminations.During operation, it receives a voltage of 5V.Currently, this electronic part is Obsolete.Data is communicated via 2 serial I/Os.UART can be mounted through a way of Surface Mount.In order for it to operate, a voltage of 5V must be applied.An IC with 44 pins is what this device is.This IC measures its clock frequency at 8MHz.The object possesses some characteristics that are similar to Configurable GPIO, Internal Oscillator, Timer/Counter.The device is capable of operating at a maximum temperature of 70°C.SC26C92 is set as the base part number for the part.A total of 15 I/Os are available for the transfer of data.A maximum supply current of 25mA is acceptable.
SC26C92C1B,528 Features
2 serial I/Os
Clock frequency of 8MHz
15 I/Os
SC26C92C1B,528 Applications
There are a lot of NXP USA Inc. SC26C92C1B,528 UARTs applications.
- Ethernet Network to Serial Ports
- Router C ontrol
- Wireless Portable Point-of-Sale Terminals
- Factory automation and process control
- Point-of- Sale Terminals
- GPS Devices
- Portable and battery operated devices
- White goods
- Battery Operated Electronics
- Wireless Infrared Data Communications Systems
